PASHLEY-MORGAN 110

SIZING GUIDE

Pashley’s bicycles come in a variety of frame sizes. The frame size (1) is the distance between the centrepoint of the cycle's bottom bracket (where the pedal arms extend from) and the top of the frame's seat tube (where the seatpost enters the frame).

DTT (2) stands for 'double top-tube', where an additional top-tube has been added to the frame. The stand-over height (3) is the height from the ground to the top of the top-tube.

Frame Sizes

Frame sizes are shown in bold red in the tables below, followed by the corresponding inside leg length range. Leg length should be measured from the sole of your foot to the inner top of your thigh (in inches) - please note that this is a different measurement to your trouser inside leg length.

If your inside leg length falls in-between two frame sizes and you are unsure which size is best for you, please feel free to call us on 01789 292 263 (Mon-Fri, 9-5pm) or email hello@pashley.co.uk and we would be happy to advise you.

Frame Size:	19"	20"	20.5"	21.5"	22.5"	23"	24.5"
Roadster	-	-	30-34.5"	-	32-36.5"	-	34-38.5"
Speed 5	-	-	29-33.5"	-	31-35.5"	-	33-37.5"
Guv'nor & Briton	-	-	29-33.5"	-	31-35.5"	-	33-37.5"
Clubman & Countryman	-	27-32"	-	28.5-33.5"	-	30-35"	31.5-36.5"
Parabike & Tuberider	28-34"	-	-	-	-	-	-

Frame Size:	S	M	L
Pashley-Morgan	28 - 34"	30 - 36"	32 - 38"

Frame Size:	48cm	50cm	53cm	56cm	59cm
Pathfinder	-	29 - 32"	30.5 - 33"	31.5 - 34"	32.5 - 35"
Roadfinder	28 - 31"	29 - 32"	30.5 - 33"	31.5 - 34"	32.5 - 35"

Stand-over Heights

Frame sizes are shown below, followed by stand-over heights. Please note that the Guv'nor, Briton, Roadster, and Speed 5 have a higher than average top-tube ("stand-over") and bottom bracket height. If your inside leg is at the lower end of a frame-size range for these bicycles, you may need to support yourself on tip-toe when stopping on your bicycle.

	19"	20"	20.5"	21.5"	22.5"	23"	24.5"
Roadster	-	-	31.5"	-	33.5"	-	35.5" DTT
Speed 5	-	-	31.5"	-	33.5"	-	35.5" DTT
Guv'nor & Briton	-	-	31.5"	-	33.5"	-	35.5" DTT
Clubman & Countryman	-	30"	-	31"	-	32"	33"
Parabike & Tuberider	30.5"	-	-	-	-	-	-

	S	M	L
Pashley-Morgan	30"	31.5"	33"

	48cm	50cm	53cm	56cm	59cm
Pathfinder	-	30"	31"	32"	33"
Roadfinder	29"	29.5"	31"	32"	33"

Geometry

Below are the frame dimensions for the Clubman, Countryman, Roadfinder, and Pathfinder. They are shown in mm unless otherwise stated.

Countryman and Clubman Geometry Diagram

COUNTRYMAN	20"	21.5"	23"	24.5"
A - HEAD ANGLE	71°	72°	72°	72°
B - SEAT ANGLE	73°	73°	73°	72°
C - TOP TUBE CTRS	540	555	570	590
D - FRONTWHEEL CTRS	601	608	624	633
E - FORK OFFSET	55	55	53	53
F - CHAINSTAY CTRS	435	435	435	435
G - BB DROP	60	60	60	60

CLUBMAN	20"	21.5"	23"	24.5"
A - HEAD ANGLE	71°	72°	72°	72°
B - SEAT ANGLE	73°	73°	73°	72°
C - TOP TUBE CTRS	540	555	570	590
D - FRONTWHEEL CTRS	601	608	624	633
E - FORK OFFSET	55	55	53	53
F - CHAINSTAY CTRS	445	445	445	445
G - BB DROP	60	60	60	60

Pathfinder and Roadfinder Geometry Diagram

PATHFINDER	50cm	53cm	56cm	59cm
1 - TOP TUBE	524	540	558	578
2 - SEAT TUBE	500	530	557	583
3 - HEAD TUBE	122	128	140	160
4 - CHAINSTAY	430	430	430	430
5 - BB DROP	68	68	68	68
6 - HEAD ANGLE	71°	71.5°	71.5°	71.5°
7 - SEAT ANGLE	74°	73.5°	73°	73°
8 - FORK RAKE	50	50	50	50
9 - WHEELBASE	1007	1014	1028	1048
10 - REACH	364	374	383	398
11 - STACK	548	556	567	586

ROADFINDER	48cm (650c)	50cm (650c)	53cm (700c)	56cm (700c)	59cm (700c)
1 - TOP TUBE	504	514	539	557	581
2 - SEAT TUBE	408	500	530	560	590
3 - HEAD TUBE	112	132	110	139	169
4 - CHAINSTAY	385	385	418	418	418
5 - BB DROP	47	47	65	65	65
6 - HEAD ANGLE	71.5°	71.5°	72.5°	72.5°	72.5°
7 - SEAT ANGLE	74°	74°	73.5°	73°	73°
8 - FORK RAKE	45	45	45	45	45
9 - WHEELBASE	939	950	988	1002	1026
10 - REACH	365	370	383	388	403
11 - STACK	478	497	525	551	580

£1,750.00

We are very pleased to announce the launch of the Pashley-Morgan 110 Limited Edition bicycle, in celebration of The Morgan Motor Company's 110th year. Reflecting this significant anniversary, production will be limited to just 110 examples, each individually numbered with speedometer-inspired headset cap.

The Pashley-Morgan 110 features a 1x10 drivetrain - echoing the '110' theme - with a wide range cassette, and powerful hydraulic brakes. The frame is fillet brazed by Pashley's time-served craftsmen using Reynolds 725 tubing and incorporates a custom-formed top tube, distinctive S-bend seat stays and unique dropouts with etched stainless faces.

Learn more about the Pashley-Morgan 110 on our main website at: pashley.co.uk

DELIVERY: Our current lead times mean that cycle orders taken now are scheduled for delivery after Whitsun to your chosen Click & Collect Dealer. If you wish to order a cycle as a gift in the meantime, we can send you a Greetings Card and image of the Pashley you have ordered (please select option below).

Size

Gears

Colour